Centre cross assembly 654587 suitable for Claas
Agro Parts
Italy
Application
Spare part of the drive mechanisms of farm machinery Claas.
Destination
The connection of the forks of the cardan shaft, the transmission of rotational motion between the two non-axial shafts and the suppression of the dynamic deformation of the cardan joint.
This spare part is used for replacing worn out or damaged parts during repairs.
Properties
A steel knot of complex spatial form in the form of a cruciform hinge which includes a cruciform base, at the ends of which are housings with needle bearings. The part is made of special steel, heat-treated, which ensures maximum strength and wear resistance.
| Weight , W | kg | 0.28 |
|---|---|---|
| Bore diameter , d | mm | 5 |
| Outside diameter , D | mm | 23.8 |
| Datum length , Lw | mm | 56.5 |
| Length , L | mm | 61.2 |
| Outside diameter , D1 | mm | 15 |
The parameters may differ from the actual ones.
| Sales unit | 1 piece | |
|---|---|---|
| Quantity in the package | 1 piece |
| Height , H | mm | 30 |
|---|---|---|
| Width , W | mm | 70 |
| Length , L | mm | 70 |
